Sport Scale
We think you will like our Sports/Scale planes. From the gentle and easy flying Lancair 52 through to the incredibly agile.
Yak 54 3D and the fantastic Bobcat for speed freaks!! And if petrol is your thing, why not try our 26cc Yak 54 or one of our 50cc range.
Click thumbnails for additional photos
Wingspan: 55” / 1400mm
Wing area:559sq in / 36 sq dm
Length: 49” / 1250mm
Weight: 5lb / 2250g
Engine : 42c .46 - 4c .52 - .70
Radio: 4 channels 5 servos
Construction: ARTF all built-up construction.
Description: The ever popular Katana, now in a new colour scheme, but still one of the best aerobatic planes to fly.
Back to top
Wingspan: 65” / 1650mm
Wing area: 686 sq in / 45 sq dm
Length: 49.2” / 1250mm
Weight: 5.0 lb / 2300g
Engine : 2c 0.40 - 0.46
Radio:4 channels 4 servos
Stock: Sold Out Awaiting New Stock
Price: £65
Construction: All built-up balsa and ply construction.
Description: A lovely low-wing version of our ever popular high-wing trainer. This one is far more aerobatic but still simple enough for a beginner to build.
Back to top
Wingspan:51” / 1300mm
Wing area: 666.5 sq in / 43 sq dm
Length: 60” / 1525mm
Weight: 5.5 lb / 2500g
Engine :2c .46 - .60
Radio: 4 channels, 8 servos
Stock: Sold Out Awaiting New Stock
Price: £115 Fixed under carriage
Price: £135 Retract ready
Construction: ARTF Fibreglass fuselage with traditional built-up wings & tail. Fixed or retractable undercarriage.
Description: Ever fancied a Jet, but were put off by the cost or by club restrictions? Well now you can have all the fun at a fraction of the price. Plane Nutz proudly presents the Bobcat. This model is based on the BVM Kingcat, but is only 51” span and takes a .46 - .60 2c engine with a pusher prop. We recommend the JEN .56 from Just Engines with an APC 11 x 7 pusher prop. This model is fast, but lands nice and slow due to the large wing area. Choice of 2 colour schemes.
Back to top
Wingspan: 55.5” / 1400mm
Wing area: 565.4 sq in / 36.48 sq dm
Length: 55.5 ” / 1400mm
Weight: 4.8 - 5.1 lb / 2200-2500g
Engine : 2c .50 - 4c .70
Radio:4 channels 6 servos
Stock: Sold Out
Price: £135
Construction: Balsa and Ply wood construction
Description: An all built-up construction electric Mustang to complement out ever popular Spitfire. Great for when you fancy a quick bit of warbird action at the local field.
Back to top
Wingspan: 65.7” / 1668mm
Wing area: 798.3 sq in / 51.5 sq dm
Length: 69.1 ” / 1755mm
Weight: 8.38 lb / 3800g
Engine :2c .91 - 4c .110
Radio: 4 channels 6 servos
Stock: Sold Out
Price: £169
Construction: ARTF Balsa and ply-wood construction with Fibreglass Cowl
Description: Fantastic quality F3A plane for a 110 size engine.
Back to top
Wingspan: 99" / 2510mm
Wing area: 559 sq in / 36.1 sq dm
Length: 44.5" / 1130 mm
Weight: 2.7 lb / 1240g
Engine : N/A
Radio: 4 channels 6 servos
Construction: ARTF Balsa and ply-wood construction. Fibreglass fuselage.
Description: So you don't want to pay £45,000 for a real one?? Then get our 99" version at a ridiculously affordable price. The full-sized ASW 28 replaces the very successful ASW 24 and is becoming a firm favourite with modellers too.
Back to top
Wingspan: 44" / 1120mm
Wing area: 565 sq in / 36.7 sq dm
Length: 38.6" / 980 mm
Weight: 5.5 lb / 2500g
Engine : 4c 0.52 - 0.70
Radio: 4 channels 5 servos
Construction: ARTF Balsa and ply-wood construction.
Description: The Boing P17 Stearman was a highly sucessful training aircraft during the Second World War and many thousands have been used daily for crop spraying.
Back to top
Wingspan: 57" / 1448mm
Wing area: 705 sq in / 45.5 sq
Length: 39.2 " / 995mm
Weight: 5.6 lb / 2300g
Engine : 2c .46 - 4c .52
Radio: 4 channels 5 servos
Stock: Sold Out
was:£149
Price: £89
Construction: ARTF Balsa and ply-wood construction. Fibreglass fuselage.
Description: So you don't want to pay £45,000 for a real one?? Then get our 99" version at a ridiculously affordable price. The full-sized ASW 28 replaces the very successful ASW 24 and is becoming a firm favourite with modellers too.
Back to top
Wingspan: 70" / 1778mm
Wing area: 877 sq in / 56.6 sq
Length: 22.9 " / 582mm
Weight: 5.3 lb / 2400g
Engine :2c .46 or 600W brushless
Radio: 5 channels 6 servos
Stock: Sold Out
was:£149
Price: £65
Construction: ARTF Balsa and ply wood construction. Trimmed and painted cowling.
Description: An unusual model, but a beautiful flier due to its large wingspan and wing area. This model comes with elevons and air-brakes.
Back to top
Wingspan: 61" / 1550mm
Wing area: 570 sq in / 36.6 sq dm
Length: 50" / 1280 mm
Weight: 5.5 lb / 2500g
Engine :2c 0.46 - 0.52 / 4c 0.60 - 0.70
Radio: 4 channels 4 servos
Construction: ARTF Balsa and Ply wood construction with fiberglass fuselage.
Description: A great plane for the pilot who wants to progress to an easy to handle low-winger after thrashing that trainer to death. Have a look at www.lancair.com and with the money you're saving getting your models from us, you can think about putting a deposit down on the real thing.
Back to top
Wingspan: 42" / 1065mm
Wing area: 597 sq in / 38.5 sq dm
Length: 44.5" / 1130 mm
Weight: 44 in / 1125 mm
Engine : 2c 0.46 - 4c 0.52
Radio: 4 channels 4 servos
Construction: ARTF Balsa & ply construction with fibreglass cowl.
Description: Since the introduction of the ultimate Biplane to the modellers, there have been rumours that the full size Ultimate is an enlarged version of the miniature aircraft design. In fact, the true story has quite an unusual twist. After several upgrades, Gordon Price who designed the Ultimate, finally produced a 300hp version, the 10-300 named Blue Hawk. The now famous Blue Hawk is owned by the noted aerobatic pilot Joan Osterud of California. She has been reworking the 10-300 to improve the trim and has contacted model producers for advice!
Back to top
Wingspan: 60” / 1740mm
Wing area: 862 sq in / 43.7 sq dm
Length: 44.5" / 1130 mm
Weight: 68” / 1727mm
Engine : 6.2 lb / 2800g
Radio: 4 channels 5 servos
Construction: ARTF Balsa and plywood construction with fibreglass fuselage. Trimmed and painted fibreglass cowl.
Description: Want something a little different to show off at the local club? This it a 6-seater business tourer from the ever popular Extra company that most people think of as only making aerobats.See here http://www.extraaircraft.com/media/500.pdf for more details.
Back to top
Wingspan: 51" / 1280mm
Wing area: 502 sq in / 32.6 sq dm
Length: 49.5" / 1255 mm
Weight: 5.3 lb / 2400g
Engine :2c 0.40 / 4c 0.52 - 0.63
Radio: 5 channels 5 servos
Construction: ARTF Balsa and ply-wood construction.
Description: Looking for something a little bit different? Our new Pole Cat 50 is one of the most exciting new planes we have seen. Styled on the pylon racing planes, but with big enough control surfaces to make it highly aerobatic too.
Back to top
Wingspan: 64" / 1620mm
Wing area: 651 sq in / 42 sq dm
Length: 46" / 1160 mm
Weight: 5 lb / 2300g
Engine: 2c 0.40 - 0.46 / 4c 0.52 - 0.63
Radio: 4 channels 4 servos
Stock: Sold Out
Price: £39
Construction: ARTF Balsa and ply-wood construction.
Description: Our super ever popular 40 size trainer at a fantastic price anyone can afford. We believe this is the best value 4 channel trainer you can buy.
Back to top
Wingspan: 63” / 1600mm
Wing area: 713 sq in / 46 sq dm
Length: 60 ” / 1520mm
Weight: 6.6 lb / 2600g
Engine : 4c .91 (ballistic with a 2c .91)
Radio: 4 channels 5 servos
Construction: ARTF Balsa and plywood construction. Trimmed and painted fibreglass cowl.
Description: Always a delight to fly the Extra, but this one is our best yet. With nice big control surfaces, this Extra will do just about anything you ask of it and with a stunning colour scheme too.
Back to top
Wingspan: 56” / 1420mm
Wing area: 531 sq in / 34 sq dm
Length: 43.3 ” / 1100mm
Weight: 5.5 lb / 2480g
Engine : 2c 0.46 / 4c 0.52
Radio: 4 channels 5 servos
Construction: ARTF Balsa and plywood construction. Trimmed and painted fibreglass cowl.
Description: Stunning colour scheme with eye catching graphics. The Z50 will do just about anything you ask of it.
Back to top
Wingspan: 54.5” / 1390mm
Wing area: 648 sq in / 41.8 sq dm
Length: 53.5” / 1360mm
Weight: 5.7 lb / 2600g
Engine :4c .52 – .70
Radio: 4 channels 5 servos
Construction: Balsa and ply wood construction. Fibreglass cowl.
Description: Our YAK 54 3D brings a new dimension to extreme flying. The ultra lightweight and all built up construction makes this the perfect 3D machine. Not for the inexperienced flyer, this model has to be seen to be believed. Just open the top hatch to reveal the incredible attention to detail of the CNC laser-cut ply formers that have been lightened to the max while maintaining strength.
Back to top